Vinyl Sheet - Maintenance



  


To keep the lasting shine and fresh feel of your investment for as long as possible, we recommend that you...


DO

  • Wipe up spills as soon as possible. Remove dried spills with New Beginning® Floor Stripper and Cleaner on a white cloth.
  • Wash your floor occasionally with Armstrong™ Once 'n Done® No-Rinse Floor Cleaner or an equivalent no-rinse floor cleaner.
  • Use Armstrong New Beginning® Extra-Strength Floor Stripper for heavy duty cleaning.
  • Use Armstrong Shinekeeper® Floor Finish or Armstrong Satinkeeper® Low Gloss Floor Finish to return your floor's original shine if it begins to dull over time.

DON'T

  • Use detergents, abrasive cleaners or "mop and shine" products - they may leave a dull film on your floor.
  • Use paste wax or solvent-based polishes.
  • Use a beater bar when vacuuming because it can visibly damage the floor surface.
  • Use highly abrasive scrubbing tools.

PROACTIVE PROTECTION FOR YOUR FLOOR

  • When moving appliances or heavy furniture, lay a plywood panel on your floor and "walk" the item across it. This protects your floor from scuffing and tears.
  • Use floor protectors, such a Armstrong Floor Protectors, on furniture to reduce indentation. As a general rule of thumb, the heavier the item, the wider the floor protector needed.
  • Be careful with rolling casters. They can damage the floor. Therefore, we do not recommend them. If you choose to use them, the double wheel type are the best option.
  • Place a walk-off mat at outside entrances to reduce the amount of dirt brought into your home. We do not recommend the use of rubber- or latex-backed mats because the chemical (antioxidant) used to keep the backing from becoming brittle can permanently stain your floor. We suggest a nonstaining vinyl-backed mat or a woven rug that is colorfast. Most of these products are identified "colorfast" by the manufacturer. All Armstrong floor care products have been specifically developed to care for Armstrong floors. You may purchase Armstrong floor care products at your local flooring retailer.
  • To avoid many of the issues listed above, try a new Armstrong ToughGuard™ vinyl floor.

IMMEDIATELY AFTER INSTALLATION

  • For 8 hours after seam application, protect the sealed seams on your flooring. This will ensure the proper seam bond. If your seams are disturbed before they're dry, permanent damage may result.
  • Maintain room temperature at 65 degrees Fahrenheit for 48 hours after installation is completed. This assures proper curing, setting and bonding of products.
  • Use a damp sponge, cloth, or mop to wipe off the Armstrong logo and 800 number printed on the face of the floor. Be careful not to wipe across any seams.
  • The adhesive under your floor needs time to thoroughly dry after installation. Therefore we recommend that you do not scrub or wash your floor for five days.